纤维目数对纤维板力学性能和成本的影响研究

采用热磨法研磨纤维,研究不同纤维目数(40~100目,20~120目,10~130目)对纤维板力学性能和成本的影响。在保证制作质量合格的纤维板试件基础上,对其进行力学性能试验,验证确定纤维目数区间的合理性,并利用确定的纤维目数区间进行密度和施胶量的单因素对比分析;分析其对力学性能和成本的影响。研究结果表明:纤维目数在40~100目时,可通过降低试件密度或减小施胶量,在保证制品较好力学性能的前提下降低制备成本,可实现优质优价经济效益最大化;从纤维板制品制备成本分析得出:采用上述三种纤维目数区间,在保证制品质量要求的前提下,可实现纤维目数区间与制品质量等级的合理匹配,达到合理利用原材料降低成本的效果。     

ECMWF细网格对浙江沿海10 m风预报性能评估

为更好地开展浙江沿海海上大风的预报服务,本研究对2012年1月1日—2014年12月31日的ECMWF细网格10 m风场产品在浙江沿海的预报性能进行评估,并将其插值到沿海站点和观测数据进行对比分析。结果表明:冷空气影响下,浙江沿海的平均误差为负值,绝对误差分布和变化趋势与平均误差基本一致;台风影响下,24 h预报时效的平均误差为正值,随着预报时效的增加,平均误差逐渐转为负值,鱼山渔场、温台渔场及舟外渔场的绝对误差较其他区域大。另外,预报值和观测数据间的相关系数随预报时效的增加而减小,两者之间的相关系数平均值随海拔高度的增加而减小;ECMWF细网格对岱山和龙山村的预报偏大,对浪岗的预报偏小,预报偏差的离散度随预报时效增加而增大。     

Square‐mesh codend length and selectivity in southeastern Australian stow nets

Abstract The relationship between the amount of square mesh in codends and selectivity was investigated for an Australian penaeid stow‐net fishery. Three lengths (3, 2 and 1 m) of square‐mesh codend made from 27‐mm mesh hung on the bar were alternately tested with a conventional 34‐mm diamond‐mesh design during two covered‐codend experiments. Compared with the conventional codend, the square‐mesh configurations incrementally selected school prawns, Metapenaeus macleayi (Haswell) across narrower selection ranges (SR) and mostly at greater sizes at 50% retention (L₅₀), while retaining fewer fish. Irrespective of the mesh configuration or square‐mesh codend length, there were significant differences between experiments (attributed to water flow) and impacts of catch weight on the selectivity of school prawns. Both variables had a negative relationship with L₅₀, while water flow similarly affected SR. This study reaffirms the utility of square‐mesh codends as a key input control for managing the selectivity of penaeid‐catching gears.     

单桩张网菱形、方形网目网囊选择性研究

近年来,一种利用帆布作为扩张装置的新型单桩张网渔具在吕四渔场得到了快速发展。为了改善这种张网对主要渔获对象的尺寸选择性,进而评价其渔获性能以及对渔业资源的影响,使用套网试验法开展了不同网目尺寸(25 mm、35 mm和45 mm)的菱形和方形网目网囊尺寸选择性试验。通过对黄鲫(Setipinnataay)和小黄鱼(Pseudosciaena polyactis)渔获体长数据的选择性分析,结果显示,无论是菱形还是方形网目网囊,其50%选择体长L50和选择范围SR都随着网目尺寸的增大而增大(L50呈线性增长)。对比菱形和方形网目的选择性发现,对于黄鲫,50%选择体长L50差异不大,但菱形网目的选择范围SR大于方形网目;对于小黄鱼,方形网目具有更好的选择特性,即具有较大的L50(8%)和较小的SR(52%),但差异均不显著。菱形和方形网目对于不同体型鱼类的选择性差异以及渔民对方形网目网囊的抵触情绪等都使得在张网渔业中推广方形网目网囊值得商榷。     

Loop细分技术在犁体曲面造型中的应用

阐述了细分方法的基本思想以及基于三角网格的Loop细分模式的原理和方法；提出了在相关几何造型、有限元分析和动态仿真软件配合下，基于OpenGL环境或CAD二次开发环境的复杂犁体曲面造型的细分方案；对犁体曲面的控制网格生成、边界限定等关键技术进行了讨论。利用该方法可以有效缩短复杂犁体曲面的造型、计算和分析时间。     

轴流式油气混输泵压缩级流场CFD模拟分析

利用Fluent计算软件,采用非定常滑动网格技术和非结构网格来模拟油气混输泵单个压缩级三维流场,通过对气液两相介质在流道内的流动情况的分析,为改进压缩级的设计提供了依据。试验证明,该方法在油气混输泵的设计中是有效的。     

Microhabitat use of the diamond darter

The only known extant population of the diamond darter (Crystallaria cincotta) exists in the lower 37 km of Elk River, WV, USA. Our understanding of diamond darter habitat use was previously limited, because few individuals have been observed during sampling with conventional gears. We quantified microhabitat use of diamond darters based on measurements of water depth, water velocity and per cent substrate composition. Using spotlights at night‐time, we sampled 16 sites within the lower 133 km of Elk River and observed a total of 82 diamond darters at 10 of 11 sampling sites within the lower 37 km. Glides, located immediately upstream of riffles, were the primary habitats sampled for diamond darters, which included relatively shallow depths (<1 m), moderate‐to‐low water velocities (often < 0.5 m·s^?1) and a smooth water surface. Microhabitat use (mean ± SE) of diamond darters was estimated for depth (0.47 ± 0.02 m), average velocity (0.27 ± 0.01 m·s^?1) and bottom velocity (0.15 ± 0.01 m·s^?1). Substrate used (mean ± SE) by diamond darters was predominantly sand intermixed with lesser amounts of gravel and cobble: % sand (52.1 ± 1.6), % small gravel (12.2 ± 0.78), % large gravel (14.2 ± 0.83), % cobble (19.8 ± 0.96) and % boulder (1.6 ± 0.36). Based on our microhabitat use data, conservation and management efforts for this species should consider preserving glide habitats within Elk River. Spotlighting, a successful sampling method for diamond darters, should be considered for study designs of population estimation and long‐term monitoring.     

Investigation of the Effect of Mesh Size on the Effectiveness of Hotplate Aqua Regia Extractions

Aqua regia extractions with subsequent inductively coupled plasma determinations are a very common method of elemental analysis of soils and sediments. Before extraction, the material must be dried and sieved. Small variations in this early step can have a significant impact on the later outcomes, especially for unassisted (for example, without ultrasonic or microwave) extraction procedures. Therefore the impact of mesh size on the sieving process was investigated. A mesh size of 2.0 mm or greater yielded unacceptably high variations between the subsamples and a very poor recovery rate when compared to a 0.063-mm sieve. A mesh size of 0.3 mm resulted in the best outcomes, losing nearly no material in the fine sediment samples and about a tenth in the coarse samples. The precision was high for the 0.3-mm samples as well, only negligibly surpassed by the 0.1-mm samples for some materials.     

桁杆虾拖网选择性装置的试验分析

设计并研制了一种内、外圆环形刚性框架和柔性六角形网片组合而成的桁杆虾拖网选择性装置。所研制选择性装置在东海区近海桁杆虾拖网中,采用对比试验法开展了海上选择性试验,并针对试验期间主要渔获品种哈氏仿对虾,以Logistic曲线为选择性模型,对六角形网目水平缩结长度分别为D1=31.00 mm,D2=27.50 mm,D3=21.25 mm三种规格选择性装置的选择性效果进行分析。结果表明,3种规格选择性装置均具有选择性效果,其中安装六角形网目水平缩结长度为31.00 mm和27.50 mm的选择性装置的目标网囊内哈氏仿对虾的优势体长均为75~95 mm,相应非目标网囊内哈氏仿对虾的优势体长分别为25~45 mm和35~55 mm,具有较显著的差异性;而安装六角形网目水平缩结长度为21.25 mm的选择性装置的目标网囊内哈氏仿对虾的优势体长35~55 mm,相应非目标网囊内哈氏仿对虾的优势体长同为25~45 mm。六角形网目水平缩结长度31.00 mm的选择性装置对哈氏仿对虾的50%选择体长L50最大,为48.89 mm,而选择性范围SR最小,为16.75 mm,在试验规格范围内的选择性效果最显著。